XDX HARDOX® Body
The Lightest & Toughest On The Market
When quarrying equipment, vehicle shredders, and mining excavators need maximum durability, they use Hardox®. Our partnership with SSAB brings you Hardox® bodies – the toughest, lightest, and best looking bodies in the industry.
- Sides, floor, doors, & top rails fabricated from Hardox® 450 wear plates
- No side posts or floor cross sills
- Reduces weight and allows steel to flex and absorb impacts
- Smooth sides are optimal for body wraps for advertising
When quarrying equipment, vehicle shredders, and mining excavators need maximum durability, they use Hardox®. Our partnership with SSAB brings you Hardox® bodies – the toughest, lightest, and best looking bodies in the industry.
- Sides, floor, doors, & top rails fabricated from Hardox® 450 wear plates
- No side posts or floor cross sills
- Reduces weight and allows steel to flex and absorb impacts
- Smooth sides are optimal for body wraps for advertising
| Model | Length (ft.) | Volume (cu. Yd.) | Side Ht. (ft) |
|---|---|---|---|
| 2236 XDX | 22 ft. | 36 cu. yd. | 6 ft. |
| 2240 XDX | 22 ft. | 40 cu. yd. | 7 ft. |
| 2245 XDX | 22 ft. | 45 cu. yd. | 7.5 ft. |
| 2440 XDX | 24 ft. | 40 cu. yd. | 6 ft. |
| 2445 XDX | 24 ft. | 45 cu. yd. | 7 ft. |
| 2450 XDX | 24 ft. | 50 cu. yd. | 7.5 ft. |
BODY FLOOR
Single 3/16″ Hardox® HX450 steel place
CROSS SILLS
None
LONG SILLS
10" structural channel with 1/4″ plate angled from bottom of 10″ channel to bottom of floor plate
HEADBOARD
3/16" Hardox® HX450 steel continuously welded to the floor, welded loops on front to hold tools. Headboard is 55” tall on XDX and 63” on MHX bodies.
BODY SIDES
3/16″ Hardox® HX450 steel continuously welded to floor
SIDE POSTS
None
BARN DOORS
3/16″ Hardox® HX450 skins, positive locking mechanism on top and bottom, 3 hinges per door
BODY HOIST
34 ton capacity minimum with dual 6″ hydraulic cylinders powered up and down for 22’ bodies. For 24’ bodies cylinders on dump hoist are power up and gravity down.
BODY LIGHTS
Meets federal lighting standards, includes elevated brake lights and LED body lights for increase visibility
PAINT
High grade primer and enamel finish
WIRING
Wire loom or conduit (optional)
Petersen Industries Self-Winding Load Cover
Rear Strobe – Mounted on Underride
Amber LED Flashers Mounted in Rear Corner Posts
Underbody Work Lights
Tool Box – Mounted under Body
